Compatible Machines – 24K632 Right Leg Repair Kit
This genuine OEM kit fits the following stand-style Graco units (right leg only):
- Graco Magnum X5 – model 262800 (Series A, B, C, D; stand/lo-boy frame)
- Graco LTS 15 (Lowe’s equivalent of X5; stand/lo-boy frame)
Note: Not for X7/ProX hi-boy cart frames. If your sprayer has wheels and a tall cart, this kit will not fit.
Product Overview
The Graco 24K632 Kit, Repair, Leg, Right restores the stability and factory stance of eligible Magnum stand-style sprayers. It’s a direct-fit replacement for the right leg stand and is designed for quick, simple installation.
| Spec |
Detail |
| Part Number |
24K632 |
| Item |
Right Leg (stand/lo-boy frame) |
| Compatibility |
Magnum X5 / LTS 15 stand models (see list above) |
| Typical Hardware |
Includes mounting hardware (commonly bolt 125116 and nut 102040); contents may vary by batch—verify in package. |
| Use Case |
Replace bent, cracked, or missing right leg; restore sprayer stability and proper angle. |
Key Benefits
- OEM fit—no drilling or modification on compatible frames.
- Stable stance—reduces vibration and wobble during spraying.
- Fast install—basic hand tools; clear mounting points.
- Durable build—engineered for jobsite use and transport.
Install Tips
- Unplug the sprayer and relieve pressure per Graco instructions.
- Lay the unit on its left side; support the pump/motor to avoid strain.
- Remove old right leg and hardware; keep spacers if present.
- Position the 24K632 right leg; align holes; install bolt/nut hand-tight.
- Square the frame, then tighten to snug—do not over-torque.
- Confirm stability on a flat surface before use.
Fit Check: If your X5/LTS 15 is a stand model (no wheels, short frame), this is the correct right-side leg kit. For cart/hi-boy frames or other Magnum models, see their specific leg/caster kits.
Frequently Asked Questions
Yes—if it’s the stand (lo-boy) frame. The Graco 24K632 Kit, Repair, Leg, Right is designed for X5 stand models and LTS 15 equivalents.
No. Hi-boy/cart frames use different leg and caster assemblies. Check your model’s parts list for the correct kit.
Kits typically include the right leg and mounting hardware (commonly bolt 125116 and nut 102040). Always confirm included contents on the package you receive.
Most users can replace the leg in under 15 minutes with basic hand tools. Ensure the unit is unplugged and pressure is relieved before starting.
If only the right leg is damaged, this kit is sufficient. If both legs show wear or bending, replacing them as a pair helps maintain frame alignment.
