Graco 243080 Pump Manifold Filter 60 mesh

The Graco 243080 Pump Manifold Filter 60 Mesh helps protect your airless sprayer by preventing debris from entering the pump or clogging the spray tip. Ideal for latex and acrylic coatings, it ensures consistent spray performance and longer pump life.

Part Number: 243080
Mesh Size: 60 (for medium to heavy coatings)
Type: Easy-Out Pump/Manifold Filter
Fits: ES/GS, ST PRO, Pro190ES, Pro210ES, Pro270ES, Magnum A100 ProPlus
Use: Filters out debris to reduce tip clogs and maintain spray quality

Retail Price: $17.1

You save: $5.47 (31.99%)

Our Price: $11.63

Based on 0 reviews

Description

Genuine Graco 243080 — 60-Mesh Pump Manifold “Easy-Out” Filter

Compatible Machines

This Graco 243080 Pump Manifold Filter 60 Mesh fits popular ES/GS and Pro-series Graco airless sprayers. Confirm your exact model below:

ST PRO Airless Sprayers
Pro190ES (Stand & Cart)
Pro210ES (Stand & Cart)
Pro270ES (Stand)
Magnum A100 ProPlus
All Graco GS and Graco ES model paint sprayers (manufacturer guidance)

Product Overview

The Graco 243080 Pump Manifold Filter 60 Mesh is a genuine Easy-Out style filter that screens debris before it reaches the pump and spray tip. A 60-mesh rating offers robust flow for common architectural coatings while helping reduce tip clogs and extend pump life.

Protects pump & tip: captures particles that cause surging and pattern defects
Easy-Out design: quick vertical removal for fast cleaning or replacement
Ideal for latex/acrylics: balanced filtration for higher-build paints and primers
OEM fit & performance: matched length and diameter for ES/GS/Pro-series manifolds

Key Specifications

Part Number	243080
Filter Type	Easy-Out Pump/Manifold Filter
Mesh Rating	60 mesh (coarser than 100-mesh; suited to many latex/acrylic coatings)
Typical Use	General interior/exterior paints, primers, and similar heavier-bodied materials
Compatibility	ES/GS series, ST PRO, Pro190ES, Pro210ES, Pro270ES, Magnum A100 ProPlus (see list above)

When to Choose 60-Mesh

Select 60-mesh when spraying medium-to-heavier coatings where you want reliable flow with effective debris capture.

Use 60-mesh for many latex/acrylic paints and primers
Step to 100-mesh for finer finishes or thinner materials if you need tighter filtration
Match gun tip screens appropriately to avoid over-restriction

Care & Maintenance

Inspect filter whenever you notice pressure fluctuation or pattern distortion
Clean with compatible solvent/cleaner; replace if mesh is damaged or permanently clogged
Keep a spare Graco 243080 on hand to minimize downtime on the job

Frequently Asked Questions

No. 243080 is a manifold (pump) filter located on the sprayer body. Gun tip filters/screens are separate parts placed inside the spray gun handle behind the tip/guard.

Use 60-mesh for many latex/acrylic paints and primers to balance flow and filtration. Move to 100-mesh for thinner materials or when you need finer debris control for high-finish work.

Replace whenever cleaning no longer restores flow, the mesh shows damage, or performance issues (surging, frequent tip clogs) persist. Heavy users should keep a spare on hand.

Some Magnum models use different filter part numbers. Check your sprayer manual or parts list to confirm if 243080 is specified. If your manual calls for a 60-mesh Easy-Out manifold filter, 243080 is the correct choice.

Yes. The inlet strainer, manifold filter, and (if used) gun screen work together. Using all specified filtration stages provides best protection and spray quality.