The Graco TrueCoat 360 is a favorite among both amateurs and professionals in the painting industry. This paint sprayer has proved itself in various fields and has become the top choice for everyone interested and involved in painting. Renowned for its efficiency, high-quality finishes, and ease of use, it is none but an efficient machine aiding all at its service.

Getting the best results out of a machine is not simple. In order to get the efficiency it is designed for, one must be familiarized with the ins and outs of the machine. It is best to understand the workings of the sprayers to get the most out of them.

There is no doubt that Graco TrueCoat 360 is a remarkable machine. It has proved to be a valuable asset for both contractors and professionals in the painting industry. Let’s delve into the specifications and features of the machine to know more about it.

In this blog post, we will discuss Graco TrueCoat 360, as well as, the tips and techniques to use your sprayer to its full potential.

Understand the Basics

Before we dive into the advanced features of this machine, let’s find out the basics and fundamental specs of this particular Graco model. Let’s start with the basic components and their functionalities. Graco TrueCoat comes with a stainless steel piston pump, a flexible suction tube, and a reversible spray tip. These components are not only what make Graco TrueCoat 360 stand out in the market, but also are key to a smooth painting experience.

While a pump, suction tube, and tip are some of the primary components of a paint sprayer, what makes the Graco TrueCoat 360 special? Yes, the key elements remain the same, but the advancement and innovation are what make them create a buzz in the market.

Preparation is Key

Preparation has always been a subject of prime importance in the painting industry. Back then, when we were entangled with brushes and rollers, we knew the importance of pre-preparation. And now, when we have advanced so much as to use innovative machines for painting, we still preach the importance of preparation before painting.

Now what needs to be prepared? Preparation is basically the area or surface that you are going to paint. It must be ensured that the area is free from dust, grime, dirt, and grease. Any loose paint present on the surface must be removed as well.

Apart from preparing the area you are going to paint, the area that you are not going to paint needs your attention too. Cover all the areas, so you don’t paint on them too.

Perfect Your Technique

Once you have prepared the surface, choose the paint that goes with your sprayer, and prepared your sprayer, you are good to learn some tips and tricks. What comes in the preparation of the sprayer? Preparing your sprayer simply means using the right tips as per your project and priming your sprayer well before use.

Now for the techniques, the best one to ensure uniform painting finishes are as follows;

·       Hold your Graco TrueCoat 360 at approx. 12 inches away from the surface.

·       Maintain a constant speed of your sprayer to control the flow of paint. Additionally, overlap each pass by not less or more than 50%.

·       Avoiding wrist flicks is a big trick in the painting industry. The paint sprayer must be kept at right angle or perpendicular to the surface,

Pressure Adjustments

A paint sprayer with adjustable pressure settings allows you to control your sprayer according to the job at hand. The pressure settings can be changed depending upon the desired finishing, and the viscosity of the paint.

Thicker paints are best suited with higher pressures, while thinner paints work well with lower-pressure settings. The same can be applied to get a finer finish. Hence, a remarkable sprayer like Graco TrueCoat 360 gives control in your hands to adjust as per your work demand.

Practice Makes Perfect

While you may be familiar with your sprayer, knowing the entire components and their functionalities, one factor that decides your expertise as a painter is your practice. Painting with a paint sprayer is all about practicality. You can be familiar with everything about your sprayer, but if you do not practice the painting, you will never be good at it.

Conclusion

Graco TrueCoat 360 is a valuable asset for both professionals and amateurs on DIY ventures. It is an epic machine both in terms of efficiency and quality finishes. Following the above-mentioned tips and techniques, we are quite sure that you will master the art of painting in no time.

Always remember, like any tool, the key lies in understanding its features, its regular maintenance and cleaning, and practice. If you ace these three things, nothing can stop you from achieving a flawless finish!