When using your airless sprayer to wrap off the day's work, cleanliness is crucial. How to clean Graco paint sprayer after use is important to think about. An airless sprayer can degrade and damage effectiveness, and the standard of work. It happens if it is not completely cleaned at the end of each day. After finishing a task, washing your spray unit can seem like the last thing you want to do. But it's important for a variety of reasons and isn't as hard or time-consuming as you think. We'll guide you through a simple process in this brief tutorial. It will help to make sure that you receive the most use out of your instruments and wash your spray unit.

Cleaning of your Graco paint sprayer:

It involves the following steps:

Assemble your containers:

Depending on whether you're painting water-soluble or petroleum-based paints such as lacquer, the paint sprayer cleanup procedure will need to adjust. To dispose of the dirty fluid cleaner, a single container should be filled with water, and the other should be unfilled. To thoroughly clean up the paint sprayer, you might need to use multiple gallons of water or thinner. Until the water leaving the drainage system is clean, pump thinner or fresh water through it.

Reset the System:

First, empty the paint sprayer of any last bits of paint. Take off the spray tip. After that, take the paint container off and unplug the nozzle from the power supply. Position the cleaner in place of the material. Any remaining paint should be poured into an appropriate container for preservation or removal. Next, add the proper cleaning solvent, advised for the kind of paint you used, to the paint bottle.

Cleaning the nozzles:

Though there are a few tricks that can help, cleaning paint sprayer is the most tiresome part of the process. An old brush, tiny pipe cleaners, and a needle with a thin tip, if necessary, are the best tools for the job. Clean both sides of the spray nozzle with a blunt object after putting the spray tip in chemicals or warm water for a few minutes. Before wrapping up and ending the day, make sure everything is verified thoroughly. When you hold the nozzle up to the illumination, you should be able to see a small amount of light coming through it.

Reassemble and do a test:

After all the parts have dried, rebuild your paint sprayer according to the instructions. Make sure everything is functioning properly and that there are no paint residues by using pure water in a high-pressure spray.

Proper Storage:

It is a crucial component that comes after the paint sprayer tilts. It guarantees how long the sprayer will last. Install a Pump Protector on your tools after washing. Store your paint sprayer in a dry, clean place, away from sunshine. Your machinery will last longer if you take care of it and make sure it's ready to go when you need it. 

Conclusion:

In conclusion, maintaining the effectiveness of your paint sprayer requires routine inspection and upkeep. You may keep your paint sprayer in optimal condition and guarantee faultless outcomes for your upcoming jobs by adhering to these easy instructions. It would help if you implemented appropriate cleaning procedures into your painting regimen.